How To Use Flash – DSLR Camera Turotial
Flash can be essential in low light, particularly when you’re shooting living subjects. But it often ends up being a necessary evil, killing the atmosphere. Ironically, flash is often of more creative use in the hours of daylight.
Sometimes called ‘synchro sun’, and better known as ‘fill flash’, a burst of artificial light can be effective in practically any outdoor situation. What’s more, you don’t need any specialist kit – you can make do with the pop-up flash that comes built into most popular DSLRs.
The main restriction with the technique is that it only works if you’re the right distance away from the right subject. A range of 2-12ft is ideal, so the trick is great for portraits.
In bright sunshine, when you might think there’s enough light anyway, flash helps reduce the contrast on a subject, filling in the shadows that make eye sockets look dark and hide other facial details. On a dull, overcast day, a burst of flash has the opposite effect, adding contrast and making portraits more three-dimensional and colourful. And whatever the weather, the flash also gives a sparkle to people’s eyes by adding bright ‘catchlight’ reflections.
In its most basic form there’s little more to the technique than firing the pop-up flash and shooting. You need to be using the right exposure mode, though. Program (P) or Aperture Priority (A) work best if you have autofocus turned on and are using standard evaluative metering.
For a more creative fill flash effect, try switching to Aperture Priority (Av) mode. You can adjust the aperture as required and the shutter speed will change automatically to suit the ambient lighting conditions. Longer shutter speeds will be selected as necessary for smaller apertures or darker surroundings, with the added bonus of blurring background movement.
Meanwhile, the main foreground subject can be kept sharp by the very short duration of the flash. Watch out for large apertures (such as f/4) in bright conditions as there is a danger the background will be overexposed, as the top shutter speed your camera can use with flash is usually 1/200 sec or 1/250 sec (depending on the model).
If this proves a problem the shutter speed will flash in the viewfinder – and you then need to lower the ISO or set a narrower aperture until the shutter speed readout stops flashing.
The beauty of fill flash is that you combine two exposures – one taken using daylight, and the other with flash. By varying the settings you can make the fill flash effect stronger or weaker, which is handy for increasing or decreasing the brightness of the background independently of the subject. Let’s see how it’s done…
Get perfect portraits with fill flash
For fill flash, the easiest exposure mode to use is Program (P). This sets the aperture and shutter speed for you, for a balanced exposure with flash. Use matrix metering, and the AF points so that the camera knows where the subject is in the frame. Now pop up the flash.
Auto exposure is often perfect, but you can play with the settings to make the fill flash effect stronger or more subtle. To make the background look darker – to make a sky look more blue, say – you need exposure compensation. Try -1.0 (one stop underexposed).
The exposure compensation will make the foreground and background darker. To ensure that the subject is properly lit, adjust the flash power. Press the flash pop-up button and turn the front dial. On cameras such as the D3100, press +/- Exposure Compensation, too.
Set the Flash Exposure Compensation to +1.0 (one stop over). This is the maximum allowed, although you can turn the power down to -3.0). Take a picture and the subject will be properly exposed but the background will be darkened by the new setting.
Top tips for using fill flash
01 Take it slow
Leave your pop-up flash set to Slow for better fill flash shots at dusk. Just press the pop-up flash button and turn the dial.
To increase the range of the built-in flash, change the ISO. Going from 100 to 800 ups the range from 2.1m to 6m at f/5.6.
Lens hoods can cause problems with fill flash, particularly when you’re close to a subject. To avoid shadows, take hoods off!
For more exposure control use Aperture Priority (A). If you see ‘Hi’ in the shutter speed readout, reduce the ISO or step down aperture.
Article From = http://www.digitalcameraworld.com/2012/05/20/master-fill-flash-in-4-easy-steps/